| Neptune354 http://cyberstorm.altervista.org/phpBB3/ |
|
| OpenWRT WAG354G V2 AnnexA problem http://cyberstorm.altervista.org/phpBB3/viewtopic.php?f=10&t=56 |
Page 1 of 1 |
| Author: | latteye [ 22 May 2008, 09:48 ] |
| Post subject: | OpenWRT WAG354G V2 AnnexA problem |
Hi I have tried OpenWRT WAG354G V2 AnnexA in http://www.webalice.it/markvd/openwrt/ That can't boot in my route. I don't have jtag, so I don't know what happend during the boot. |
|
| Author: | Jacek [ 02 Jun 2008, 23:23 ] |
| Post subject: | Re: OpenWRT WAG354G V2 AnnexA problem |
My router (V2 AnnexA) boots up, however I can't log to it Power led is 'craaaasy' - I have the same behavior on (V1 AnnexA) and I can logon. Any idea ? (@latteye - you have to wait 2-3 minuts after flashing - don't turn off switch if 'power led' blinking) -------------------------------- I found source of the problem: acx111 driver (tested with v0.3.36 and 37) . acx: this driver is still EXPERIMENTAL acx: reading README file and/or Craig's HOWTO .... acx: compiled to use 32bit I/O access..... acx: running on a little-endian CPU acx: PCI/VLYNQ module v0.3.37 initialized, waiting for cards to probe... <-- and router hangs If you don't need wifi you can use fresh build from: http://downloads.x-wrt.org/xwrt/kamikaz ... s/ar7-2.6/ |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|