Neptune354

Ivan · **Joined:** 27 Aug 2007, 13:41 **Posts:** 3

For a combined video and data installation, depending on the number of simultaneous channels supported (i.e., number of STBs at the home), up to seven different PVCs required.

cyberstorm · **Joined:** 04 Jun 2007, 17:55 **Posts:** 67

try to build firmware with MULTIPVC_SUPPORT and CONFIG_MULTIPVC enabled in cy_conf.mak and cy_conf.h

Ivan · **Joined:** 27 Aug 2007, 13:41 **Posts:** 3

I did not have environment, recurred to perform building. Can you do it for me?

cyberstorm · **Joined:** 04 Jun 2007, 17:55 **Posts:** 67

v1 or v2? Annex A or B?

Ivan · **Joined:** 27 Aug 2007, 13:41 **Posts:** 3

v2 Annex A

PS
Do plan support Linksys WAG200G-EU DSL/WiFi (http://woytekm.googlepages.com/wag200g-euhardwareinfo)?

cyberstorm · **Joined:** 04 Jun 2007, 17:55 **Posts:** 67

thanks to Carciofone who has built the firmware, you can download it here

WAG200G has the same hw of WAG354G V2, but different bootloader, so firmwares are not compatible out of the box... WAG200G has wpa2, so i think is better to remain stuck with the firmware by woytekm..

On the other side you can try to get WPA2 on the wag354g v2.....I dont have a v2 version, so I cannot do much for this...

Neptune354

Seven different PVCs

Who is online